Knowledge Base

Move Arm Block

 

output-onlinepngtools__231_.pngThis block works for EV3!

mceclip1.png

The EV3 robot has a cool arm, which can be used for flipping switches or for pushing or dragging objects.

The arm can be set to one of its two positions: Up or Down:

mceclip0.png  move_arm.gif

Note: When the arm is in its lowered position, is blocks the Ultrasonic sensor, meaning the robot will think there is an obstacle in front it, while it’s just its arm. If you plan on using the Ultrasonic, make sure to move the robot's arm to the 'up' position so that the sensor's beam is not blocked.

Was this article helpful?
1 out of 1 found this helpful

Comments

Please sign in to leave a comment.

Powered by Zendesk