RoboX Simulation Toolbar

At the bottom-right corner of the simulation screen is a toolbar with several buttons:

Below are explanations for each button.

Button	Action	Explanation	Keyboard Shortcut
	Restart	Restarts the mission, setting the Robot Arm and any other components back to their starting position and deleting all the user’s code.	F2
	Reset Cell	Resets only the work cell to its starting position. User’s code is not deleted.	Q
	Reset Camera	Resets the camera angle to the original view.	V
	Camera Mode	Switches the camera angle between 6 positions relative to the cart.	C
	Work Envelope	Shows or hides the robot’s work envelope (reach limits)	B
	Change Theme	Switches between 5 possible themes/skins.	T
	Mission Brief	Shows or hides the Mission Brief (mission instructions/goal)	M
	Manual	Shows or hides the RoboX Simulation Manual	A
	Fullscreen (upper-right corner)	Enlarges the simulation to fullscreen. To exit fullscreen view, click the ESC key on the keyboard.	N/A